Influence of external load on friction coefficient of Fe-polytetrafluoroethylene

A coarse-grained molecular dynamics simulation model was developed in this study to investigate the friction process occurring between Fe and polytetrafluoroethylene(PTFE).We investigated the effect of an external load on the friction coefficient of Fe–PTFE using the molecular dynamics simulations and experimental methods.The simulation results show that the friction coefficient decreases with the external load increasing,which is in a good agreement with the experimental results.The high external load could result in a larger contact area between the Fe and PTFE layers,severer springback as a consequence of the deformed PTFE molecules,and faster motion of the PTFE molecules,thereby affecting the friction force and normal force during friction and consequently varying the friction coefficient.     

卷积神经网络用于近红外光谱古筝面板木材分级

目前,我国乐器制作行业在古筝面板用木材等级的筛选上主要依赖于技师主观评判,但此法缺少科学理论的依据,效率低,客观性及出材率的提高等方面受到限制,无法满足乐器市场的大量需求。实现古筝面板用木材快速、智能化的分级工作是一个急需解决的课题。近红外光谱非常适用于测量含氢的有机物质。古筝面板木材主要化学成分的化学键均由含氢基团组成,不同等级板材的化学成分存在差异,这些差异反映在近红外光谱中,为判断木材等级提供了可能。同时卷积神经网络对非线性数据具有较强的特征提取能力,所以提出一种应用卷积神经网络模型对光谱数据进行分析的方法,进而判别木材的等级。应用了Savitzky Golay一阶、二阶微分两种预处理方法和核主成分分析、连续投影算法两种数据压缩方法,通过所设计的卷积神经网络模型以样本识别准确率和模型构建过程中的损失值作为判定指标选出最佳预处理和数据压缩方法。为了提高模型提取分析光谱数据的能力和避免过拟合现象,应用了多通道卷积核、批量归一化和early stopping策略,将通过两层卷积层提取的特征信息送入全连接层,从而充分提取剩余信息,通过Softmax函数获得板材的最终预测等级,从而确定了最终模型。最终Savitzky Golay一阶微分和核主成分分析为最佳数据处理方法,同时得出用于区分不同等级的古筝面板用木材的主要关键谱带,分别为1 163~1 243, 1 346~1 375和1 525~1 584 nm。将该模型应用于测试集样本,古筝面板用木材的等级识别准确率为95.5%。实验结果表明所提出的方法可以高效地处理光谱数据,有效识别区分不同等级的古筝面板用木材的关键特征,从而为广阔的乐器市场提供一定的技术支持。     

干式变压器有限元仿真模型的电磁和振动分析

随着电力需求的逐年增长,干式变压器的数量也在不断增加。干式变压器在运行时存在着振动和噪声的问题,为了对干式变压器振动的规律与特点进行研究,本文建立了干式变压器本体振动的有限元仿真模型,通过电磁分析获得相应的磁场分布,然后利用结构动力学分析得到其本体振动的相关规律。通过对处于运行状态的变压器振动数据进行实测分析,得到变压器振动的特征频率,然后对仿真结果进行对比分析,可以发现振动幅度与频率之间存在的关系。本文的研究结果可对干式变压器的减振降噪研究提供参考。     

结合VEC和信心水平分析Black-Litterman投资组合模型

在理论上通过推导得出了Black-Litterman模型(B-L模型)最优权重与信心水平的关系式.实证部分开创性地将多元时间序列VEC模型运用到B-L模型的观点收益预测中.结果表明:且通过向量误差修正模型,实证取得了较好的效果.在任意一种做空限制下,随着信心水平在0%~70%水平上升,收益率有连续上升的趋势,并逐渐趋稳;风险有并不明显的下降的趋势.对同一信心水平而言,随做空限制的放宽,收益率有上升趋势.     

多孔复合钙铝氧化物的制备、表征及在重整生成油中的脱氯应用

采用低廉的铝盐和钙盐,通过共沉淀法制备了一系列不同CaO含量的CaO-Al₂O₃复合氧化物,并用XRD、TG-DTG、N₂吸附-脱附、SEM等手段对其进行表征。结果表明,制备的复合氧化物两相分布均匀、孔隙率较高、存在较多的介孔和大孔,比表面积也较大。采用动态吸附法将制备出的复合氧化物应用于重整生成油中氯化氢的脱除反应中,结果表明,高比表面积和大孔容的CAO-1具有最佳的HCl脱除效果,当反应温度为55 ℃、液空速为3 h^-1,重整生成油中氯含量小于等于15 ng/μL时,其氯容可达到18%。     

Crystallization of Poly(ethylene adipate) within γ-Phase Poly(vinylidene fluoride) Matrix

The effects of PEA on the γ-phase PVDF crystal structure and the crystallization of PEA within the pre-existing γ-phase PVDF spherulites have been investigated by optical microscopy(OM), infrared spectroscopy(IR) and scanning electron microscopy(SEM). The results demonstrate that the γ-phase PVDF spherulites consist of the lamellae exhibiting a highly curved scroll-like morphology and develop preferentially in PEA-rich blend. With increasing PEA concentration, the scroll diameter increases and the scrolls are better separated from each other. PEA crystallizes first in the interspherulitic region and transcrystalline layer develops. Subsequently, the transcrystalline layer of PEA continues to grow within the γ-phase PVDF spherulites, e.g., in the region between the scrolls, until impinging on other PEA transcrystalline layers or spherulites. The crystallization kinetics results indicate that the growth rate of PEA crystals in the intraspherulitic region of γ-phase PVDF shows a positive correlation with content of PEA, but a negative one with the crystallization temperature of γ-phase PVDF.     

Ionic Conductivity of β‐Cyclodextrin–Polyethylene‐Oxide/Alkali‐Metal‐Salt Complex

Highly conductive, crystalline, polymer electrolytes, β‐cyclodextrin (β‐CD)–polyethylene oxide (PEO)/LiAsF₆ and β‐CD–PEO/NaAsF₆, were prepared through supramolecular self‐assembly of PEO, β‐CD, and LiAsF₆/NaAsF₆. The assembled β‐CDs form nanochannels in which the PEO/X⁺ (X=Li, Na) complexes are confined. The nanochannels provide a pathway for directional motion of the alkali metal ions and, at the same time, separate the cations and the anions by size exclusion.     

From single‐chain folding to polymer nanoparticles via intramolecular quadruple hydrogen‐bonding interaction

Single‐chain folding via intramolecular noncovalent interaction is regarded as a facile mimicry of biomacromolecules. Single‐chain folding and intramolecular crosslinking is also an effective method to prepare polymer nanoparticles. In this study, poly(methyl methacrylate‐co?2‐ureido‐5‐deazapterines functionalized ethylene methacrylate) (P(MMA‐co‐EMA‐DeAP)) is synthesized via free radical polymerization. The single‐chain folding of P(MMA‐co‐EMA‐DeAP) and the formation of the nanoparticles in diluted solution (concentration <0.005 mg/mL) are achieved via supramolecular interaction and intramolecular collapsing during the disruption‐reformation process of the hydrogen bonding triggered by water. The size and the morphology of the nanoparticles are characterized by dynamic light scattering, transmission electron microscope, and atomic force microscope. The results show that the size of the nanoparticles depends on the molecular weight of the polymer and the loading of 2‐ureido‐5‐deazapterines functionalized ethylene methacrylate (EMA‐DeAP) on the polymer backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1832–1840